If you are studying this, it's possible that your boiler has stopped working – or at the absolute least, that you're worried it could. This guide will help you cope with the problem by describing what to do if your boiler breaks down and when you should call a gas engineer in Leeds.
Signs of a broken boiler
Aside from discovering a lack of hot water in your home, there're a few other regular boiler issues to keep an eye out for, including:
ü Sounds of unusual whistling, hammering, or tapping
ü Excessive gas utilization implies that the boiler isn't working correctly.
ü The pilot light or flames are orange/yellow, even though they should be blue.
ü Instead of continuing at a consistent pressure, it will show a high system water pressure.
ü Your system's pipes have developed a leak.
ü Your boiler isn't working.
Few things to look for if your boiler breaks down
When something goes wrong with your boiler and stops working, most modern boilers will display an error code. Before turning it off, write down the trouble code and make sure any other gas appliances are working correctly. If not, there's possibly an issue with the gas supply.
Examine the power supply.
· Fuse box tripped: First, check if a fuse box's switch has tripped, as this could affect your boiler. If you've recently experienced a power outage, your boiler's timer may've reset. Verify that the time displayed on the clock corresponds to the current time
· A Prepaid meter: If you have a prepaid meter, running out of credit will cut off your supply and cause your boiler to shut down.
· Ignition lead: If you hear clicking noises when trying to light your boiler, it could be due to a broken ignition lead or electrode. It's also possible that the boiler will light up but then turn off. A fault code will usually occur if your boiler is newer.
· Fan isn’t working: The boiler's fan drives hazardous gases out of the boiler and into the flue. The boiler will lock up and not ignite if the fan is not running.
Examine the gas (or oil) supply.
· Gas valve: There could be a clog or damage obstructing the gas passage. Check other gas appliances for proper operation, and ensure the Emergency Control Valve at the gas meter hasn't been accidentally turned off.
· Gas pressure: Your boiler may've troubles if there's too much or too little gas. If the gas pressure is incorrect, it’ll most likely display a problem code. Test the gas pressure throughout your system with a registered Gas engineer in Leeds.
Check the water supply
Check that your hot water supply is still turned on; if it isn't, call your water provider for assistance in resolving the issue.
Check the boiler pressure
Look at the pressure gauge or the boiler display to see if that's the case. The water pressure should be between 1 and 2 bars, according to the readout. Less than one bar indicates low water pressure. Try to repressurize the boiler by following the boiler manual's directions.
Examine the thermostat and timer
You should set your thermostat above room temperature and turn on your central heating programmer. If a timer controls the system, the clock may’ve moved ahead or backward and adjusted.
Check for frozen pipes
Because of the UK's chilly environment, a frozen condensation can quickly produce a blockage that might cause the boiler to overflow, resulting in a breakdown. While we recommend consulting an experienced Gas Safe Registered engineer for help with frozen condensate pipes, you can try using a hot water bottle or pouring warm water down the pipe's end before turning the boiler on and off.
Check the pilot light
You can try to light the pilot light independently by following the directions in your boiler manual or inside the boiler door.
Check for common boiler fault codes
A fault code on your modern boiler may appear, allowing you to swiftly and accurately diagnose the problem. However, complicated issues will necessitate the services of a Gas Safe Registered engineer.
Still struggling with a broken boiler? Call a professional.
There could be various reasons why your boiler won't ignite, including the numerous safety devices. If there isn't a visible problem, a professional diagnosis is required. Because your boiler is a gas device, you must use caution when attempting to repair any concerns. Remember that a Gas Safe Registered engineer must work on the gas boiler; anyone else trying to fix it is breaking the law.
If you've done everything above and your boiler is still not working, then schedule a visit from one of Leeds’s Gas Safe Registered engineers, who’ll be able to identify the problem and recommend the best course of action.
0 Comments